Order any time for FAST, FREE Shipping on all orders over $80
Pinewood Derby Cars

Benefit from over 20 years of Pinewood Derby™ racing experience. Get the book that gives you "ALL THE TIPS", not just a few. Lead the Pack!
"You Can Be The

  Home > Speciality Tools >

  Derby Worx Pro Body Jig

Alternative Views:

List Price: $42.95
Our Price: $39.95

Product Code: A107

Finally, a tool that lets you precisely drill all four axle holes in any wheelbase length you like with one set up just like the PRO's!

The Pro Body Jig performs the same function as the Pro Body Tool, with the added precision and simplicity of just setting everything up one time to drill all 4 holes in one set-up, highly increasing your alignment accuracy for even GREATER SPEEDS!. Added benefits of using the Pro Body Jig include locating the axle holes higher on the body block to lower the the ride height  which will increases your cars stability. (weights must be mounted  in the body, screw on and stick on weights will hang too low for the track and most rules) and  a 3rd hole in the floor of each tool end will aid the builder in accurately drilling a raised hole for a "3 wheel on the track" design, or help with a Rail Rider Alignment for the ULTIMATE in speed!

The Pro Body Jig is precision C.N.C. machined for accuracy and features a precision ground / hardened tool steel support bar for the ultimate in adjustment accuracy from the shortest wheelbase all the way to a full 7" like the official body block

Comes with a #44 sized drill bit.

You will also need 2 rubber tipped clamps and a 3/32 hex key ("Allen wrench"), both not included.

The Pro Body Jig cannot be used to drill pilot holes in axle slots. (due to the higher positioned holes in the tools)  Please check your local rules for legality before you decide to extend your wheelbase or drill holes for axles.

Precission Made in the U.S.A.

Accessories for this product...
Bullet Lube Tungsten Putty 1oz 1/2 oz Tungsten Cylinders -1oz kit. Derby Worx Pro Rail Rider Tool
Our Price: $8.50

Our Price: $5.95

Our Price: $5.25

Our Price: $12.95

Bullet Lube Tungsten Putty 1oz. Tungsten Cylinders-Tungsten Cylinders
Derby Worx Pro Hub and Shaver Combo Derby Worx Pro Axle Press
Our Price: $15.75

Our Price: $16.95

Pro Axle Press

Average Customer Review: 4 of 5 | Total Reviews: 5 Write a review.

  0 of 0 people found the following review helpful:
3/32 Allen wrench March 11, 2015
Reviewer: cynthia moholland from ROBBINSTON, ME United States  
The 3/32 Allen wrench called for will not fit the allen screws in the jig.  The screws were burred up on the heads.  I had to tap them out and buy replacements.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Excellent Product March 7, 2015
Reviewer: Derby Dad from Green Bay , WI United States  
Great tool, easy to use, and well built!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Great tool April 3, 2013
Reviewer: Mike from South Jordan, UT United States  
Much easier than drilling new precise holes with only a drill or even a drill press!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
relpacing the worn out tool with one better January 26, 2012
Reviewer: JOHN O'BRIEN from PAHRUMP, NV United States  
I have the single axle jig and have used it for years to the point where the drill hole is worn out. The whole pack borrows my tools each year. The jig made the drilling of the wheels very simple and straightforward. I am looking forward to seeing the difference in time come race day.As for the competition no other pack will race mine because we leave them at the starting line.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
Great December 8, 2011
Reviewer: TA from MN United States  
Works perfect

Was this review helpful to you?