These are the same as our Derby Worx Pro Inertia Lite wheels except that these wheels come in three different colors... Blue, Oronge and Yellow.The Derby Worx Name Says it All. These Are the Absolute Best 1.5 - Gram BSA Wheels on the Market.
The DERBY WORX Pro Intertia Lite wheels are precision milled on a $50,000 CNC lathe. The wheel diameter (radial runout) is controlled to within an amazing 0.0005 inches. The OD of the wheel is lightly machined. This makes the OD of the wheel concentric to the wheel bore and removes any marks on the wheel for a perfectly flat and concentric wheel. The axle hubs have been reamed ever so lightly to straighten the hub and help with your alignment then they are burnished to smooth finish. The outer friction robbing step has been removed and replaced with a cone as well as the inner hub is lightly trued and coned to provide the ULTIMATE in performance! The inside of the wheel is machined to remove material thus creating the ultra light wheel without modifying the outward appearance of the wheel. Lighter wheels have less rotational mass and turn much easier than standard BSA® wheels. Lighter wheels also allow you to put more weight to rear of car which gives your car more potential energy to release as the car rolls down the track. Wheels are matched by mold number for a perfectly matched set of wheels. All material is removed from inside the wheel and the wheels are Stock Appearing from the outside. Official BSA® Logo and Mold number are still visible and intact on both the outside and inside of the wheel.